• Sharp Xe A106 Manual Download Windows 10
• Sharp Xe A106 Troubleshooting Guide
• Xe A106 Sharp Cash Register

Thank you for purchasing the SHARP Electronic Cash Register Model XE-A101. Please read this manual carefully before operating your machine. Keep this manual for future reference. It will help you solve any operational problems that you may encounter. For assistance call 1-800-BE-SHARP SHARP ELECTRONIC CASH REGISTER MODEL XE-A101 INSTRUCTION.

Installing a Paper Roll

Always install the paper roll even when you set the
register for not printing journal or receipt in REG mode.
1. Push the printer cover forward and detach it.
2. Place a paper roll in the paper roll cradle so

Sharp XE-A106 Cash Register User Manual. Of 2 Installing a Paper Roll. Always install the paper roll even when you set the. Register for not printing journal or receipt in REG mode. Push the printer cover forward and detach it. Place a paper roll in the paper roll cradle so. View and Download Sharp XE-A106 instruction manual online. Sharp Electronic Cash Register Instruction Manual. XE-A106 Cash Register pdf manual download. Sharp XE-A106 User Manual. Void, Entries, Programming. Sharp Computer hardware. View and Download Sharp XE-A106 instruction manual online. User Guides and Service Manuals. Manuals Sharp XE-A106 Sharp XE-A106 User Manual. Size: 476.55 Kb. To continue the download you need to go through the captcha. Sharp Electronic Cash Register Xe-a106 Troubleshooting Support questions and answers for Sharp XE-A106. I reset my register, having different departments with different tax rates. Now when I try to ring u. Sharp Electronic Cash Register Xe A506 Ca/at/ns Button Failure Wont Open register. View and Download Sharp XE-A106 instruction manual online. Sharp Electronics Corporation is the United States. Subsidiary of Japans Sharp Corporation. Sharp is a worldwide developer of one of a kind home appliances and professional displays. Sharp is dedicated to improving people's lives through the use of advanced technology and a commitment to innovation, quality, value, and design.

that the paper unrolls from the bottom.

Tax 1

@/TM

@/TM

Tax rate (7.0000%)

Min. taxable

amount ($0.11)

#/

SBTL

Changing Other Settings As Necessary

Your cash register is pre-programmed so that you
can use it with minimum setup. To change the initial
settings, see the appropriate sections.

Initial Settings
Departments 1 to 4:
Taxable 1. Positive (+). Preset price: 0.00
Departments 5 to 8:

Non-taxable. Positive (+). Preset price: 0.00

PLU codes 1-10:

Assigned to dept. 1. Preset price: 0.00

PLU codes 11-80:

Not used

When you program the tax status for a department,
tax will be automatically added to sales of items
assigned to the department according to the
programmed tax status for the department. You can
also enter tax manually.

There are two tax programming methods. The tax
rate method uses a straight percentage rate per
dollar. The tax table method requires tax break
information from your state or local tax offices. Use
the method which is acceptable in your state. You
can obtain necessary data for tax programming from
your local tax office.

D

D

D

D

D

For tax table programming, see 'programming'

Tax Rate Programming
The percent rate specified here is used for tax
calculation on taxable subtotals. Turn the mode
switch to the Z/PGM position and use the following
sequence to program the tax rate:

9

➝

#/

SBTL

➝ Tax number(1-4) ➝

@/TM

➝ R

➝

@/TM

➝ Q ➝

where R and Q represent the following.
R: Tax rate (0.0000% to 99.9999%) x 10000
Enter the rate in 6 digits (leading zeros may be
omitted). If the rate is fractional (e.g., 4 3/8%), it
should be converted to its decimal equivalent
(4.375) before entering.
Q: Minimum taxable amount (0.01 to 99.99) x 100
Smallest amount for which tax must be collected. In
some states, sales whose amounts are less than the
minimum taxable amount are not subject to tax. If
amounts $0.01 to $0.10 are not taxed, the value of
Q would be 11 (for $0.11), the lowest of the first
taxable category.

Time (2:30 p.m.)

#/

SBTL

#/

SBTL

D

D

D

D

D

Always enter the date in 6 digits. For

example, enter

0

2

1

5

1

0

for

February 15, 2010. If you change the date
format in the Z/PGM mode, follow the newly
specified format when setting the date.

D

D

D

D

D

•Always enter the time in 4 digits even when

the hour is in the single digit. For example,
enter

0

6

3

0

for 6:30 a.m.

• 6:30 a.m. prints as “06-30” and 6:30 p.m.

prints as “06-30@”.

Setting the Time

Turn the mode switch to the Z/PGM position and
enter the time in 4 digits (“hhmm” format) using the
24 hour system. Press the

#/

Sharp Xe A106 Manual Download Windows 10

SBTL

key once to continue

programming or twice to exit the program mode.

3. Insert three new AA batteries.

Initializing the Cash Register

For your cash register to operate properly, you must
initialize it before programming for the first time.
Follow this procedure.
1. Remove the register from its packing carton.
2. Insert the supplied mode key into the mode

switch and turn it to the REG position.

3. Insert the plug into the AC outlet.

IMPORTANT: This operation must be performed
without batteries loaded.

4. The buzzer will sound three times. Now your

cash register has been initialized. The display
will show '0.00' with “ ”.

Installing Batteries

Batteries must be installed in the cash register to
prevent data and programmed contents from being
lost from the memory in case of accidental
disconnection of the AC cord or power failure. Please
install three new “AA” batteries before programming
and operating the cash register. Once installed, the
batteries will last approximately one year. When it is
time to replace them, the “l” symbol will appear on
the display to indicate a low battery voltage. If the
symbol appears, you must replace them within two
days.
Install the batteries according to this procedure with
the AC cord connected:
1. Push the printer cover forward and detach it.

4. When the batteries are properly installed, “ ”

on the display will disappear. Close the battery
cover.

5. Attach the printer cover.

Thank you for purchasing the SHARP Electronic Cash Register Model XE-A106. Please
read this manual carefully before operating your machine. Keep this manual for future
reference. It will help you solve any operational problems that you may encounter.

For assistance call

1-800-BE-SHARP

SHARP ELECTRONIC CASH REGISTER

MODEL

XE-A106

INSTRUCTION MANUAL

WARNING

FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

CAUTION

The socket-outlet shall be installed near the equipment and shall be easily accessible.

FOR YOUR RECORDS

Please record below the model number and serial number, for easy reference, in case of loss or theft.
These numbers are located on the right side of the unit. Space is provided for further pertinent data.

Model Number_______________________________________________________

Serial Number_______________________________________________________

Date of Purchase_____________________________________________________

Place of Purchase____________________________________________________

Handling Cautions

Install the cash register in a location not subject to direct sunlight, unusual temperature
changes, high humidity, or splashing water.

Do not operate the cash register with wet hands. Water can cause internal component failure.

The cash register plugs into any standard wall outlet (120V AC ± 10%). Avoid connecting any

other electrical devices on the same electrical circuit since such connection could cause the
cash register to malfunction.

When cleaning the cash register, use a dry, soft cloth. Never use volatile liquids, such as
benzine or thinner. Chemicals can discolor or damage the cabinet.

For protection against data loss, please install three new “AA” batteries before using the cash
register. However, never forget you must initialize the cash register before installation of
batteries; otherwise damage to memory contents or malfunctioning of the register will occur. You
can start operating it only after initializing it and then installing batteries.

For complete electrical disconnection, pull out the main plug.

Printed in China

O(TINSE2598RCZZ) 1

Getting Started

For Easy Set-up,

See “Getting Started”

View from rear

View from rear

2. Open the battery cover next to the paper roll

cradle.

3. Insert the paper straight into the paper inlet,

and press the f

f

f

f

f key. The inserted end

comes out at the printing area.

4. (For journal printing)

1

1

1

1

1

Insert the top end of the paper into the
slit in the take-up spool shaft and fold
the inserted end toward you.

2

2

2

2

2

Wind the paper two or three turns.

3

3

3

3

3

Mount the paper holding plate onto the
take-up spool.

4

4

4

4

4

Place the take-up spool on the bearing.

Date (February 15, 2010)

#/

SBTL

#/

SBTL

Put the spool shaft in the larger hole of the paper
holding plate and push the plate in the direction
of the arrow.

5. Attach the printer cover.
(For receipt printing, step 4 should be omitted.)

Programming the Tax Rate

Before you can proceed with registration of sales,
you must first program the tax that is levied in
accordance with the law of your state. Your cash
register comes with the ability to program four
different tax rates. In most states, you will only
need to program Tax 1. However, if you live in an
area that has a separate local tax (such as a Parish
tax) or a hospitality tax, your register can be
programmed to calculate these separate taxes.

In order to program the tax to be collected in
accordance with the law of your state, you must
specify the tax rate(s) and minimum taxable
amount(s).

Checking the Time and Date

You can display the time and date to check if they
are correctly set.
1. Turn the mode switch in the REG position.
2. Press the

@/TM

key once to display the time.

3. Press the

@/TM

key a second time to display the

date.

Setting the Date

In the Z/PGM mode, enter the date in 6 digits using
the month-day-year format. Press the

#/

SBTL

key once

to continue programming or twice to exit the
program mode.

D

D

D

D

D

Before placing a new paper roll in the paper
roll cradle, cut off the pasted (taped) part of
the paper and confirm that the cut end of the
paper is straight.

Maintenance

Batteries

This cash register provides a low battery symbol
(l) and a no battery symbol ( ) which appears on
the far left of the display in one of the following
situations:

Low battery symbol (l)
• When the voltage of the batteries installed in the

cash register is under the required level.

No battery symbol ( )
• When three batteries are not installed in the cash

register.

• When the batteries installed in the cash register

are dead.

When either of these symbols appear, check
batteries. If no batteries are installed, install three
new “AA” batteries at once. If batteries are already
installed, replace them with new ones as soon as
possible. If the AC power cord is disconnected or a
power failure occurs when the batteries are dead
or not installed, all the programmed settings will be
reset to the default settings and any data stored in
memory will be cleared.

D

D

D

D

D

If the low battery symbol appears while
making a transaction, complete the
transaction before replacing the batteries.

C

Improper use of batteries could cause them to burst

or leak, which might damage the interior of the cash

register. Please take the following precautions:

•Be sure that the positive (+) and negative (-) poles

of each battery are oriented properly.

•Never mix batteries of different types.

•Never mix old batteries and new ones.

•Never leave dead batteries in the battery

compartment.

•Remove the batteries if you plan not to use the cash

register for long periods.

•Should a battery leak, clean out the battery

compartment immediately, taking care not to let the

battery fluid come into direct contact with your skin.

•If an incorrect battery is used, it may explode or

leak.

•For battery disposal, follow the relevant law or

regulation in your country.

Replacement

1. Be sure the cash register is plugged in.

2. Turn the mode switch to the REG position.

6. Check that the “ ” symbol has disappeared.
7. Close the battery cover.
8. Replace the printer cover.

C

Improper use of batteries could cause them

to burst or leak, which might damage the

interior of the machine. See the cautions in

the 'Getting Started' section.

Paper Roll

When colored dye appears on the edges of the
paper roll, it is time to replace the roll. Use paper
of 2 1/4' (57 mm) in width. To prevent jamming be
sure to use paper specified by SHARP.

Replacement (Journal printing)

1. Turn the mode switch to the REG position.
2. Open the printer cover.
3. Press

f to advance the paper by several

lines and then cut the paper to remove the
take-up spool from the bearing.

5. Install three new “AA” batteries into the

battery compartment.

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

1-800-BE-SHARP

http://www.sharpusa.com

Drawer Handling

Locking the Drawer

Develop the habit of locking the drawer when not
using the register for any extended period of time.

To lock:

Insert the key into the drawer lock and
turn it 90 degrees counter-clockwise.

To unlock: Insert the key into the drawer lock and

turn it 90 degrees clockwise.

Removing the Drawer

To remove the drawer, pull it out and lift it up.

D

D

D

D

D

• To prevent burglary, it is a good idea to

empty the drawer after work and leave it
open at the end of the day.

• Coin case is detachable. Also the

separators of the coin case are
removable.

Manually Opening the Drawer

In case of a power failure or if the machine is out of
order, locate the lever at the bottom of the machine
and move it in the direction of the arrow to open
the drawer. The drawer will not open if it is locked
with the drawer lock key.

Coin case

View from rear

4. After cutting the existing paper, remove the

paper roll. Then remove the remaining paper
by pressing

f

.

5. Remove the paper holding plate from the

spool.

View from rear

4. Open the battery cover and remove the old

batteries.

6. Remove the used journal paper roll (if used)

from the take-up spool.

7. Install a new paper roll, the paper holding

plate and the take-up spool according to the
instructions in 'Getting Started.'

C

In the case of receipt printing, steps 3, 5 and

6 should be omitted and the paper holding

plate and the take-up spool need not be

installed in step 7.

Replacing the Ink Roller

1. Open the printer cover.

2. Remove the ink roller by pulling it upward.

3. Install a new ink roller.

4. Close the printer cover.

Installing the Mounting

Bracket

A

A

B

B

How to attach the mounting bracket
1.Thoroughly clean the table surface where you
wish to place the bracket (B).
2.Peel off the release paper of the adhesive tape
on the bracket.
3.Hook the bracket onto the hook (A) at the
bottom of the back of the register.
4.Hold down the bracket so that it firmly sticks to
the table surface.

How to release the register from the mounting
bracket
Lift up the front of the register and pull it towards
you.

A mounting bracket which prevents the register
from moving accidentally is supplied with your
XE-A106 register. Attach the bracket to a table
where the register rests, as follows:

Specifications

Model:

XE-A106

Size:

Inches: 13.0 (W) x 14.3 (D) x 9.21 (H)

Millimeters: 330 (W) x 363 (D) x 234 (H)

Weight:

Approx. 11.0 lbs. (5.0 kg)

Power Source:

2017 toyota tacoma sr manual 4wd double cab. 120V AC±10%, 60Hz

Power Consumption:

Stand-by: 4 W, Operating: 12.5 W

Working Temperature:

32 to 104˚F (0 to 40˚C)

Display:

LED (Light-Emitting Diode) numeric display

Printer:

1 station, print wheel selective type

Printing Capacity:

Max. 13 characters

Paper Roll:

Width: 2 1/4' + 1/64' (57.5mm + 0.5mm)

Max. external diameter: 3-5/32' (80mm)

Min. internal diameter: 15/32' (12mm)

Cash Drawer:

4 slots for bills, 5 for coins

Accessories (supplied):

Paper roll: 1 roll

Mode key: 1

Drawer lock key: 1

Instruction manual (English): 1 copy

Instruction manual (Spanish): 1 copy

Quick Start Guide (English): 1 copy

Quick Start Guide (Spanish): 1 copy

Ink roller: 1 (installed)

Take-up spool: 1

Paper holding plate: 1

Mounting bracket: 1

• Specifications and appearance are subject to

change without notice for improvement.

Before Calling for Service

If you encounter any of the following problems,

please read below before calling for service.

The display shows symbols that do not make

sense.
• Has the machine been initialized properly as

shown in “Getting Started”?

The display will not illuminate while the

machine is turned on. The machine will not

operate when any key is pressed.
• Is the power supplied to the electrical outlet?

(Plug another electrical device into the outlet for

confirmation.)

• Is the power cord firmly connected to the

electrical outlet?

The display is illuminated, but the machine will

not accept key entries.
• Is the mode switch properly set to the REG

position?

• Has the machine been initialized properly as

shown in “Getting Started”?

Journal paper will not feed properly in the printer.
• Is the take-up spool installed properly?

• Is there a paper jam?

• Is the journal format selected in the printing

format programming?

(If the receipt format is selected, the paper is not

wound around the take-up spool.)

Printing is faded or illegible.
• Is the ink roller used up?

• Has the ink roller been installed properly?

Lever

Push this part in the direction of the
arrow to remove paper holding plate.

END-USER LIMITED WARRANTY

Model Specific Section (Carry-in Service)

Your Product Model Number & Description: XE-A106 Cash Register

(Be sure to have this information available when you need
service for your product.)

Warranty Period for this Product:

One (1) Year Parts and 90 Days labor from date of purchase

Additional Item(s) Excluded from
Warranty Coverage (if any):

Any consumable items such as paper supplied with the Product.

Where to Obtain Service:

From a Sharp Authorized Servicer located in the United States.
To find the location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1- 800-BE-SHARP.

What to do to Obtain Service:

Ship prepaid or carry in your Product to a Sharp
Authorized Servicer. Be sure to have

Proof of

Purchase

available. If you ship the Product, be sure it is insured and
packaged securely.

TO OBTAIN PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com.

SHARP ELECTRONICS CORPORATION warrants to the first end-user purchaser (the “Purchaser”) that this Sharp

brand product (the “Product”), when new and shipped in its original container, will be free from defective

workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective

Product or part thereof with a new or remanufactured equivalent at no charge to the Purchaser for parts or labor for

the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth

below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper

voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or

construction.
In order to enforce the rights under this limited warranty, the Purchaser should follow the steps set forth below and

provide proof of purchase to the servicer.
To the extent permitted by applicable state law, the warranties set forth herein are in lieu of, and exclusive of, all

other warranties, express or implied. Specifically, ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH

ABOVE ARE EXCLUDED. ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY

EXCLUDED. If, under applicable warranties is limited to the period(s) from the date of purchase set forth below.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those

described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of

Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole

and exclusive remedy available to the Purchaser. Correction of defects, in the manner and for the period of time

described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the Purchaser

with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence,

strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects

in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized

servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or

property damage. Some states do not allow limits on warranties or on remedies for breach in certain transactions; in

such states, the limits herein may not apply.

3. Pull the printer cover upward and detach it.

• View Details

  Sharp
  0GS6330140///
  Drawer Key

  9.00 - Click for details
• View Details

  Sharp
  0GS6160040///
  Guide Wheel

  4.00 - In Stock
• View Details

  Sharp
  0GSXE-A106U58
  Keyboard Unit Pw Board

  68.40 - Ships in 7 days
• View Details

  Sharp
  0GSXEA102A30C
  Main Unit Pw Board

  83.04 - Ships in 7 days
• View Details

  Sharp
  0GS9216330///
  Operation Manual (English)

  5.00 - Ships in 7 days
• View Details

  Sharp
  0GS6330160///
  Operator Key

  13.00 - In Stock
• View Details

  Sharp
  0GSXE-A10241/
  Printer Interface Unit Pw Boar

  7.01 - Ships in 7 days
• View Details

  Sharp
  0GS6158120///
  Spool

  Click for details

Sharp Xe A106 Troubleshooting Guide

Xe A106 Sharp Cash Register